flash
Home>Products>Lighting Sensor>Wireless Lighting Sensor System> Microwave Lighting Sensor (MT-500)
top
Microwave Lighting Sensor (MT-500)
  • Product ID : MT-500
  • Description :

The Wireless Lighting Sensor System consists of one “Controller” and many “Sensors”. It utilizes wireless transmission at 433MHz frequency to connect the controller and the sensors which greatly reduces the amount of wiring works. This system is commonly used in hallways of large apartments, hotels, office buildings, government offices, and automated assembly lines in factories, or spaces where people don’t loiter such as large parking lots, warehouses, outdoor gardens, long corridors and public washrooms.
1. The system work with general AC-power lightings --- When people are physically present in these public spaces, lights sharing the same circuit in these spaces will switch on fully; when there is no one, they will switch off completely. --- Controller model JS-DCRM only.
2. The system work with 0~10V or 1~10V Dimmable LED lightings with external driver --- When people are physically present in these public spaces, lights sharing the same circuit in these spaces will switch on fully. When there is no one, they will switch into their standby brightness (percentage of brightness can be adjusted) --- Controller model JS-DCRM2 only.
3. “Evening Lighting Timer Function (Dusk Activated Lighting)” --- When used outdoors or indoor with sunlight, system will automatically switch lights on at dusk (standby brightness, adjustable). When there are movements within the detection zone, lights switch on fully. When no one is physically present, lights switch into their standby brightness and switch off at dawn --- Can be customized.

Features:
● With adjustable twilight setting.
● With adjustable reach setting.
● When an object enters the detection area, the sensor transmits signal to switch lights on (100% brightness). Time setting is via DIP switch on controller.
● With “Dusk Activated Lighting” function (customized): At dusk, the sensor transmits signal to switch lights into standby brightness. At dawn, the sensor transmits signal to switch lights off. --- May work with 0~10V or 1~10V Dimmable LED lightings with external driver.

bottom
introduction

Specification:
Model
MT-500
Method of Detection
Microwave 5.8GHz±75MHz
Operating Voltage
AC110V/AC220V 50Hz/60Hz
Twilight Setting
10 ~ 1000 lux (Adjustable)
Angle of Coverage
360 degrees (Top View) 180 degrees ( Side View)
Reach
2~8 meters radius at 2.5 meters mounting height (Adjustable)
Operating Temperature
10 ~ 40
Power Consumption (Standby)
0.5W (AC110V) / 1W (AC220V)
Frequency of Transmitting/Receiving
433MHz
Transmitting Distance
Maximum 500 meters open space